From 23 to 26 June, Department No. 9 “Physical Problems of Materials Science” held a series of defences of final qualifying theses by bachelor’s, master’s and postgraduate students. The event was a significant occasion in the scientific life of the department and the university as a whole.
The defences demonstrated a high level of preparation among the graduates, as noted by members of the state examination boards. The defences took place in an atmosphere of constructive dialogue between candidates and examiners. All participants demonstrated deep knowledge of their subject, the ability to apply theory in practice, and the ability to solve current scientific problems. The graduates’ research covered a wide range of contemporary areas of materials science.
We extend our sincere thanks to all members of the state examination boards for their professional approach to assessing the work and for their valuable recommendations. Special thanks go to the supervisors and lecturers for training highly qualified specialists.
Department No. 9 continues its tradition of high-quality training of specialists in materials science and invites prospective students to join the scientific community.
No. |
Student |
Thesis title |
| POSTGRADUATE STUDIES | ||
1. |
Ekaterina Alexandrovna Bazdnikina |
“Study of the formation mechanisms of the amorphous and amorphous-crystalline state of bulk Zr-based alloys produced by selective laser melting and electric-pulse powder consolidation” |
| 2. | Artem Igorevich Gabov | “Synthesis and study of photocatalytic materials with mixed anion types” |
| 3. | Saule Mukhanbetovna Irmagambetova | “Development of heat-resistant ferritic steels alloyed with silicon and aluminium” |
| 4. | Nikolai Dmitrievich Komarov | “Study of the mechanisms of primary radiation damage formation in iron oxide Fe3O4 and at the interface between metallic iron and iron oxide” |
| 5. | Nikita Sergeevich Popov | “Development of a tungsten-iron composite material for plasma-facing components” |
| MASTER’S PROGRAMME | ||
| 6. | Artem Dmitrievich Azarchenkov |
“Primary radiation damage in uranium dioxide from atomic collision cascades produced by low-energy (up to 1 keV) recoil atoms” |
| 7. | Andrey Leonidovich Bocharnikov | “Analysis of texture formation in two-phase titanium alloys during rolling” |
| 8. | Polina Anatolyevna Britan | “Comparative calculation of the effect of gaseous fission products on the temperature field distribution in VVER fuel” |
| 9. | Roman Zurabievich Kakhidze |
“Theory and modelling of ordering kinetics in binary alloys” |
| 10. | Ivan Mikhailovich Kleshchev |
“Determining the mechanism of gas bubble nucleation in uranium dioxide” |
| 11. | Natalia Alexandrovna Litovchenko |
“Study of carbon fibre surface modification methods for producing metal matrix composite materials” |
| 12. | Darina Andreevna Mikheeva |
“Development of a method for producing a corrosion-resistant brazed joint between silicon carbide and E110 alloy in an aqueous environment” |
| 13. | Arina Ramilyevna Khamidulina |
“Modelling of the irradiation experiment for the IFA-636 assembly in the Halden research reactor” |
| 14. | Ekaterina Romanovna Chernavskaya |
“Development of a method for producing hermetic SiC/SiC joints resistant to high-temperature corrosion in water and steam” |
| 15. | Elena Sergeevna Chubieva |
“Development of a method for synthesising Cr2AlC MAX-phase coatings by magnetron sputtering” |
| BACHELOR’S PROGRAMME | ||
| 16. | Damir Rustamovich Abashev |
“Application of the finite element method for calculating the complex stress state in brazed joints between VK100 alumina ceramic and 29NK alloy” |
| 17. | Igor Vladimirovich Antonenkov | “Modelling texture evolution in 08Kh18N10 austenitic steel subject to phase transformations during plastic deformation” |
| 18. | Artem Pavlovich Blinov |
“Effect of microstructural organisation on the mechanical stability of Ni-rich layered cathode materials for Li-ion batteries” |
| 19. | Valeria Alexandrovna Borisova |
“Production of brazed joints between beryllium and 316LN corrosion-resistant steel” |
| 20. | Boris Igorevich Voronkov |
“Production of transparent ceramics based on polycrystalline aluminium oxide by spark plasma sintering” |
| 21. | Gleb Alexandrovich Davydov |
“Study of ZTA ceramic-titanium brazed joints produced using biocompatible rapidly quenched Ti-Zr-Cu-Ni and Ti-Zr-Co filler alloys” |
| 22. | Renat Alikovich Ilyasov |
“Modelling the plastic deformation process during ring specimen testing of E635 alloy with hydrides of different orientation” |
| 23. | Ksenia Andreevna Popova |
“Determining the optimal 3D printing regime for producing an amorphous-structure Zr35Ti30Be27.5Cu7.5 alloy from crystalline powders with irregular particle shape” |
| 24. | Ivan Vsevolodovich Selyansky |
“Corrosion interaction of hafnium hydride in contact with liquid sodium” |
| 25. | Danila Sergeevich Sychev |
“Modelling the decomposition of CO2, NO2 and SO2 on Al2O3, TiO2, NiO, CuO and Y{H3-2x}Ox“ |
| 26. | Maxim Sergeevich Uryvin |
“Modelling radiation-induced defect formation in austenitic and martensitic-ferritic steels” |
| 27. | Alexander Alexandrovich Fedorov |
“Effect of piezoceramic additives on the properties of a polyvinylidene fluoride-based polymer composite” |
| 28. | Makar Dmitrievich Fokin |
“Mathematical modelling of fast charged particle transport in solids” |
| 29. | Elizaveta Petrovna Khrenova |
“Study of the effect of vacuum-arc deposition process parameters for (Al,Ti)N coatings on their physical and mechanical properties” |
| 30. | Valeria Sergeevna Chernyakova |
“Oxidation kinetics of uranium dioxide-based nuclear fuel” |
| 31. | Artem Dinenovich Yu |
“Modelling texture formation during the rolling of molybdenum alloys” |